Walter new HU6 round insert with special chip breaker
430Hits2012-10-25 14:34:00 Source:Walter
Walter new HU6 round insert with special chip breaker
Chip breaker control - this is a very high standard in the process of metal cutting.Chip is too long, after all, is the process of low production efficiency, short tool life of the most common cause.Tubingen's walter company using the latest development of the blade groove type direct cut to the chase: new Tiger, tec ® Silver (Silver Tiger) HU6 round blade perfect for medium rough machining and rough machining for heavy cutting.
Walter new HU6 round insert with special chip breaker
Someone might have seen produced during the train wheel inner contour machining of big chip, this chip are often not ideally cut off, but if he try walter new HU6 round blade, soon will be impressed by its good performance, the sintering of Tiger, tec ® Silver (Silver Tiger) indexable insert adopted a new groove, especially for solid wheel and forgings of medium rough machining and rough machining for heavy cutting research and development.Try a knife at the scene of the wheel manufacturers in show that this new blade walter life expectancy increased by 40%.
The most important innovation lies in the special shape of chip removal slot, can achieve perfect chip forming, and ultimately chip breaker within the required range.New round blade element is the most reliable, Tiger tec ®, Silver (Silver Tiger) coating.The coating can be divided into four kinds of different grades, three applicable to steel parts processing, a kind of suitable for cast iron processing.In addition, walter company also offers from 10 mm to 32 mm in diameter six dimensions.
"Our new insert efficiency function in detail, reflect accurately is embodied in the groove and the combination of the coating", walter tubingen headquarters and HU6 round blade, head of marketing innovation manager Gianfranco Dell 'Aquila explained, "so our blade, in principle, applicable to the railway vehicle manufacture, generators, steam turbine manufacturing all the heavy cutting and rough machining of forging processing.
HU6 shank can connect Walter Capto ™ tool bar.Using this interface, tool change rapidly and can deliver higher cutting force.
Product details：
• 10, 12, 16 mm diameter RCMT basic shape is suitable for locking screw locking and curved bar
• 20, 25, 32 mm diameter RCMX basic shape is suitable for the stability of curved lever lock
• Tiger, tec ® Silver (Silver Tiger) cutting material WPP10S, WPP20S, WPP30S, WKK20S